Tyre pressure BMW Serie 1 Cabriolet

Find the tyre pressure for BMW Serie 1 Cabriolet in the below inflation table for different engine powers and tyre sizes.

The inflation pressures indicated (bar) are valid for cold tyres, They should be checked at least every 15 days. When driving exclusively on motorways or with a partial load, we recommend using the same inflation pressure as when driving with a full load.

EngineTyre sizeFront pressureRear pressureFront loadedRear loaded
2.0 118 i195 55 R16 87H SSR2.22.52.63.1
2.0 118 i205 50 R17 89V SSR22.32.42.9
2.0 118 i205 50 R17 89V VA SSR22.4
2.0 118 i205 55 R16 91H SSR22.12.22.7
2.0 118 i215 40 R18 89Y VA XL SSR22.7
2.0 118 i225 45 R17 91V HA SSR2.32.9
2.0 118 i245 35 R18 92Y HA XL SSR2.33.2
2.0 120 d205 50 R17 89W SSR2.22.42.63.1
2.0 120 d205 50 R17 89W VA SSR2.22.6
2.0 120 d205 55 R16 91V SSR22.42.42.9
2.0 120 d215 40 R18 89Y VA XL SSR2.22.7
2.0 120 d225 45 R17 91W HA SSR2.43
2.0 120 d245 35 R18 92Y HA XL SSR2.43.2
2.0 120 i205 50 R17 89V SSR2.22.52.63.1
2.0 120 i205 50 R17 89V VA SSR2.22.6
2.0 120 i205 55 R16 91V SSR22.42.32.8
2.0 120 i215 40 R18 89Y VA XL SSR2.22.7
2.0 120 i225 45 R17 91V HA SSR2.42.9
2.0 120 i245 35 R18 92Y HA XL SSR2.43.2
2.0 123 d205 50 R17 89W SSR2.32.62.83.3
2.0 123 d205 50 R17 89W VA SSR2.32.8
2.0 123 d215 40 R18 89Y VA XL SSR2.32.8
2.0 123 d225 45 R17 91W HA SSR2.63.3
2.0 123 d245 35 R18 92Y HA XL SSR2.63.3
3.0 125 i205 50 R17 89W SSR2.42.62.83.3
3.0 125 i205 50 R17 89W VA SSR2.42.8
3.0 125 i215 40 R18 89Y VA XL SSR2.42.8
3.0 125 i225 45 R17 91W HA SSR2.63.3
3.0 125 i245 35 R18 92Y HA XL SSR2.63.3
3.0 135 i205 50 R17 89W VA SSR2.52.8
3.0 135 i215 40 R18 89Y VA XL SSR2.72.8
3.0 135 i225 45 R17 91W HA SSR2.73.3
3.0 135 i245 35 R18 92Y HA XL SSR2.73.3

Front pressure, Rear pressure: Tyre pressure front and rear with empty car with driver and one passenger / Front loaded, Rear loaded: Front and rear tyre pressure with a loaded car or with additional passengers.

* These tyre pressure data are provided for information purposes only. Tyre pressure does not warrant or make any representations regarding the use or results of the use of this information. It is essential that you consult your vehicle owner’s manual for the correct inflation pressure for your tyres.

** It is essential to maintain the correct inflation pressures for the Tyre pressure BMW model Serie 1 Cabriolet, Low tyre pressure and under-inflated tyres can lead to excessive tyre wear, poor handling and reduced fuel economy. High tyre pressure and over-inflated tyres can result in reduced traction, poor braking and may even lead to a tyre blowout. Regularly check the tyre pressure and maintain correct inflation to enjoy safe, comfortable driving, save money on fuel and keep car insurance premiums low.

*** To check the tyre pressure of the BMW Serie 1 Cabriolet, you’ll need to know the recommended tyre inflation and a gauge or your System TPMS ((always make sure you have a tyre spoons and levers or tyre valve tools)), Check tyre inflation when tyres are “cold” and have not been driven on for at least 3 hours. Adjust tyre inflation BMW Serie 1 Cabriolet to the recommended tyre pressure levels as required by adding air with a air compressor Tyre pressure BMW Serie 1 Cabriolet.

**** Tyre pressure fluctuates with ambient temperatures, so when temperatures drop, tyres can lose pressure. Never over-inflate above the pressure indicated on the tyre sidewall. Be sure to check tyre pressure regularly in winter to keep tyres properly inflated for safe driving on snow and icy roads, Consult your owner’s manual for recommended winter tyre pressure BMW Serie 1 Cabriolet.